Glue gun use attention

The glass glue gun provides convenience for our glue, but in the process of use because of not paying attention to the glue gun early damage.  

1. The air pressure should not be greater than 145psi.  

2. Before removing the glue gun, separate the air pressure tube.  

3. For smooth operation, use the solvent recommended by the sealant manufacturer to remove the remaining sealant from the barrel after each construction.  (Do not soak the glue gun in the solvent)  

4. During construction, the front end plug of the barrel should always be closed.  

5. After construction, please put the glue gun gently and be careful to damage the front cover and rear silencer.  

6. Don't point your gun at others.  

7. In the continuous working process, the glue gun should not stop working for more than 5 minutes each time, otherwise, glue should be applied until the glue is discharged.  

8. The high-pressure hose shall not be forced to squeeze or bend to prevent the normal operation of the glue gun from being affected.