How to use Manual Adhesive Dispenser Gun?

1. First of all, read the life book, pay attention to the different components of the glue gun, and how they should work. The manual can tell you whether your glue gun will automatically heat up, or need to be opened and closed, how long the preheating time takes, and what materials are recommended.  

2. Check whether there are signs of damage to the glue gun, before inserting the power supply or using the glue gun, carefully check the glue gun, check for cracking, fragmentation or any other signs of damage, to see whether the wire is worn or broken.  

3. Ensure that there is no old glue residue in the nozzle. There should be a clear melting path at the tip of the glue gun.  

4. Put the glue stick in the back of the gun, pick up a new glue stick, place one end of the stick in the round opening behind the gun, and slide it in until it stops.  

5. Insert the power cord of the glue gun into the power socket.  The heating element of the glue gun will automatically start to heat the glue stick. Do not touch the nozzle or leave the glue gun unattended.  

6. Wait for the glue to warm up and give the glue gun a few minutes to soften the glue. For most glue guns, the heating process takes about two minutes.  

7. Gently squeeze the switch to release the melted glue, turn the nozzle of the glue sprayer down, and stick it to the item you want to glue.  

8. Start with a small amount of glue, then determine if you need more, too much can harden a soft surface and make it look ugly.  Turn off the switch of glue gun after use.